报告时间：2020年11月20日（周五）18:00-20:00
报告地点：腾讯会议，会议ID：45915113811
报告简介：For the development of specialty doped optical fiber, a novel method of combining time-resolved / spectroscopic and DSP techniques for fluorescence lifetime measurement has been proposed. In this presentation, Dr. Luo will firstly introduce the principle and measurement procedures of this novel characterization technique. Then, the applications of this new technique for the lifetime measurement of Bi/Er codoped fibre, the identification of multiple bismuth active centre and the assessment of the performance of Er/Yb co-doped optical fibre will be briefed.
随着特种掺杂光纤的发展，提出了一种结合时间分辨/光谱学和DSP技术进行荧光寿命测量的新方法。在本次报告中，罗博士将首先介绍这种新颖的表征技术的原理和测量程序。然后，将简要介绍该新技术在Bi/Er共掺杂光纤的寿命测量、多个铋活性中心的鉴定以及Er/Yb共掺杂光纤的性能评估中的应用。
报告人简介：LUO YANHUA, PhD, Deputy director of Photonic & Optical Communications, University of New South Wales (UNSW), Australia. Dr Luo received his B.E and PhD degrees from University of Science and Technology of China (UTSC) in 2004 and 2009, respectively. His research interest is functional photonics materials, fibers and devices, including specialty optical fiber, optical fiber communication and sensing research work, etc. He presides over the experimental teaching on ‘Photonics Network’, ‘Optical Fiber and Optical Circuit’, etc. He has made many contributions in doped optical fibre, polymer optical fiber grating, Bi/Er co-doped optical fibre and its ultrabroad emission: i.e. developing 3 modes EDFA applied for the mode multiplexing transmission by NEC America Lab; introducing 3D printing technique for the fibre fabrication; develop D shaped fibre gratings applied for SHM of the world largest wind turbine by Vestas; proposing and developing bismuth erbium codoped fibre with ultrabroad band emission; etc. He has participated/hosted 19 projects, including: 2 ARC, 4 NSFC, 1 AFOSR, 1 ECR/FRG, 9 Open Funds, etc, with a total funding of ~1.5 million AUD. So far, he has held 2 China patents and co-authored >200 refereed journal / conference papers and 9 book chapters on these subjects. His papers have been cited >1600 times by ISI Web of Science, with an H-index 21.
LUO YANHUA，博士，研究员，澳大利亚新南威尔士大学（UNSW）光子通信实验中心实验室主管，于2004年和2009年在中国科学技术大学获得学士和博士学位，博士期间曾两次受国家资助，到UNSW光子通信实验中心开展光敏聚合物光纤的研究。主要从事光子学材料及其应用的研究，特别是特种光纤、光纤通信和传感方面的研究工作，并主持《光子学网络》、《光纤及光路》等教学实验。在掺杂光纤、聚合物光纤光栅、铋铒光纤及超宽带光发射等方面取得了一系列国际领先的研究成果，如在国际上首次报道3D打印的聚合物光纤预制棒及光纤；研制的三个模掺铒放大光纤创新性应用于美国NEC公司的模分复用传输系统；将D-型光纤光栅成功应用于世界最大的风力发电Vestas公司等。先后参与/主持澳大利亚国家研究基金（2项），国家自然科学基金项目（4项）、亚洲航空航天研发项目（1项）、国家/省级重点实验室开放课题项目（9项）、UNSW校级青年基金（1项）等19个项目的研究，项目经费高达150万澳币。迄今已在国内外著名期刊及会议发表论文〉200篇，授权专利2项，受邀撰写学术专著6章节，h因子为21，总共被引用1600多次。
本报告由燕山大学引才引智国际合作培育项目资助。
校内联系人：信息学院付兴虎，18833822248
科学技术研究院
2020年11月16日
